Key facts
- Rail works in 180+ countries, with Premium unavailable in 31 countries and First class in 40.
- Rail charges top-up, monthly and issuance fees, with additional FX fees for foreign-currency payments. Compare the current fees and limits with your alternatives before choosing a tier.
- Paying in your home currency at a foreign terminal cost 2.6% to 12% more in Stiftung Warentest’s checks.
- Hertz may hold up to $500 plus the estimated charges on a card at pickup, money a prepaid balance cannot spend.
Every card payment runs on a card network, the system that links a shop’s terminal or a website’s checkout to the program behind the card.
A crypto card works inside that system without the merchant knowing where the balance came from. The limits on where it works come from three other places: the countries the card program excludes, the payment habits of particular merchants, and the costs that appear when the card is used in another currency. This guide maps each of them for Rail, with the arithmetic for spending abroad and the rules that decide whether a card is accepted in a given country.
A crypto card works wherever its network does, minus the countries its program leaves out
A merchant accepting a crypto card runs an ordinary card payment. The terminal or checkout sends the card details over the network to the card issuer, which approves the charge against the card balance. The crypto was converted into that balance earlier, when you topped up, so nothing about the payment itself involves a blockchain.
Rail’s terms describe the scope in the same terms. Under Part B, Rail cards “may be used to pay for goods and services at merchant locations and in online environments that accept cards of the relevant payment system.” The same part adds that Rail “does not guarantee acceptance of the Card by all merchants” and bears no liability when a merchant refuses it.
The two Rail tiers carry the same network and the same reach, with different fees for spending in another currency. The figures below come from Rail’s fees and limits page, updated November 13, 2026.
| Premium | First class | |
|---|---|---|
| Top-up fee | 4% | 3.5% |
| FX fee | 0.5% | 2–2.5% |
| Per-payment limit | $30,000 | $80,000 |
| Daily limit | $180,000 | $1,000,000 |
| Monthly limit | $1,000,000 | No limit |
| ID check | Not required | Not required |
| Monthly fee | $5 | $10 |
Rail lists its cards as accepted worldwide and puts their reach at 180+ countries. The difference between the card network’s 200+ and Rail’s 180+ is the set of countries Rail’s card program does not serve, set out in the next section.
Rail’s FX fee on non-dollar payments is 0.5% on Premium and 2–2.5% on First class. Check the billing currency and the current fees and limits before paying.
Rail’s country lists leave 31 countries off Premium and 40 off First class
Rail publishes a separate list of excluded countries for each tier, and Rail Research set both out in its comparison of Rail and SolCard. Premium is not available in 31 countries: Afghanistan, Belarus, Bosnia and Herzegovina, Burundi, the Central African Republic, Cuba, the Democratic Republic of the Congo, Ethiopia, Guinea, Guinea-Bissau, Haiti, Iran, Iraq, Lebanon, Liberia, Libya, Mali, Montenegro, Myanmar, Nicaragua, Niger, North Korea, Russia, Sierra Leone, Somalia, South Sudan, Sudan, Syria, Venezuela, Yemen and Zimbabwe.
First class excludes the same 31 and nine more: Bangladesh, China, India, Indonesia, Morocco, Nepal, Turkey, Ukraine and the United States. A US resident can hold Premium but not First class. Rail’s published lists describe where each card is offered, and they do not say whether a First class card issued elsewhere works on a visit to one of the nine extra countries, so check with Rail support before relying on it there.
Hong Kong sits outside both tiers. Rail’s terms exclude people located in, resident in, citizens of or tax residents of Hong Kong, even though the terms themselves run under Hong Kong law.
Location counts as well as residence. Rail’s terms list, among prohibited uses, any activity that would “result in us providing Services to a person located in a jurisdiction subject to country-wide or territory-wide sanctions, or in any other country or territory in which we do not offer Services.” A Premium holder who lives in Germany and travels to one of the 31 excluded countries is, on that wording, outside the service while there.
Some exclusions follow sanctions, which can shut a country off from cards issued abroad whatever a program’s own list says. Russia is the best-known case, and it appears on both of Rail’s lists.
Rail does not publish a reason for each entry on its lists, and this guide does not assign one.
What spending abroad costs
Rail charges a 4% top-up fee on Premium and 3.5% on First class, plus monthly fees of $5 and $10 respectively. Issuance costs $25 on Premium and $40 on First class. Payments in a foreign currency carry an FX fee of 0.5% on Premium and 2–2.5% on First class.
The total depends on your tier, billing currency, top-up amount and network fees. Compare the complete, current fees and limits before funding your card; the lower FX fee alone does not determine which tier costs less.
Both tiers have a $10 minimum top-up. Keep enough available balance for upcoming payments and any merchant holds.
Saying yes to your home currency at the terminal can cost 2.6% to 12% more
Terminals and websites abroad often offer to charge a foreign card in the card’s own currency, a service called dynamic currency conversion. For a Rail card, that means a prompt to pay in US dollars instead of euros or yen. The merchant’s payment provider sets the exchange rate.
The markups run well above Rail’s FX fees. In checks across 13 non-euro countries cited by the European consumer organization BEUC in an October 30, 2017 position paper, the German consumer group Stiftung Warentest found that dynamic currency conversion raised the price by between 2.6% and 12% in every case where it was used, and by 2% to 5% for shop payments. A Norwegian bank’s study of 1,500 cash withdrawals, cited in the same paper, put the average extra cost at 7.6%, with a largest markup of 12.4%. The paper put British travelers’ yearly spending on these conversion fees at roughly £300 million, citing a Financial Times report from October 19, 2017.
On the $2,000 trip above, a 2.6% markup adds $52 and a 12% markup adds $240, against Rail’s FX fee of $10 on Premium or $30 on First class. Choosing the local currency leaves the conversion to the card network and Rail’s published FX fee, which sits below every markup in that range.
The European Union regulates how the offer is shown, not whether it is made. Regulation (EU) 2019/518 requires providers to express the total currency conversion charges “as a percentage mark-up over the latest available euro foreign exchange reference rates issued by the European Central Bank” before the payment, under provisions that apply from April 19, 2020. Outside the EU the rules differ, and the prompt may show only the converted total.
The prompt appears in a few predictable places: card terminals in shops and restaurants, hotel checkouts, cash machines and foreign websites that show prices in your currency by default. On a terminal, the screen usually offers two buttons, one in the local currency and one in yours. Pick the local currency.
Hotels, car rentals and fuel pumps hold more than they charge
A hold, known as a pre-authorization, reserves part of a card balance without charging it. On a credit card a hold eats into a credit line; on a prepaid card it freezes money you have already deposited, so the balance shown as available drops by the full amount of the hold until the merchant releases it.
Car rentals place the largest holds. Hertz’s US card policy says it “may place an authorization amount of up to US$ 500.00 plus the estimated charges on a customer’s card,” and lists prepaid cards only as a way to pay “at the end of your rental,” not to qualify for the car at pickup. A prepaid crypto card can settle a Hertz bill but cannot secure the rental, and its balance needs room for the hold if you pay with it. Hertz adds that further holds apply if the car comes back late or the rental terms change in a way that adds charges, so a longer trip can freeze more of the balance than the first hold suggests.
Accommodation bookings work in a similar way. Airbnb holds the full reservation amount when you book and charges it up to 24 hours later, and if a request is declined or expires, the release can take up to seven business days, depending on the card provider, according to Rail’s Airbnb guide. A declined request on a prepaid card leaves that money unavailable for up to a week, so a second booking attempt needs a second balance.
Fuel pumps hold before you fill up. Visa and Mastercard raised the amount a US gas station can hold at the pump to $175 in June 2022, as Kelley Blue Book reported at the time, up from $125 earlier that year. A $40 fill-up can tie up $175 of a prepaid balance until the station finalizes the charge.
Online services place holds too, usually small ones to check a new card. DigitalOcean says a preauthorization hold can show for up to seven days without becoming a charge, and OpenAI places a temporary $5 authorization hold on new cards, according to Rail’s guides for both services. Each is minor on its own, but several in the same week reduce what a tight prepaid balance can spend.
A hold can make a balance that looks big enough decline a payment. Before a trip that includes a rental car or hotel stays, top up enough to cover the holds as well as the spending, and expect the excess to return to the balance some days after checkout.
Phone wallets, transit gates and foreign checkouts each set their own terms
A Rail card spends in shops through Apple Pay or Google Pay, since both tiers are virtual cards. Apple’s list of countries and regions that support Apple Pay, published October 27, 2026, has 101 entries, fewer than the 180+ countries where Rail works. Where a phone wallet cannot be used, or a terminal has no contactless reader, a virtual card pays online and in apps but not at the counter, a gap our guide to the virtual vs physical crypto card covers in detail.
Public transport is one of the easiest places to use a foreign card. Transport for London accepts contactless cards and devices such as phones and watches for pay as you go, notes that “many contactless cards issued outside the UK can be used,” and caps fares by day and by week. Its one strict rule is to touch in and out with the same card or device, so that you pay the right fare. London’s warning that “overseas charges may apply” refers to the card issuer’s fees, which for a Rail card means the FX fee on every fare charged in pounds.
Online merchants add rules of their own for foreign buyers. Namecheap’s card-decline guide says an IP address in another country can cause a decline, so a renewal or purchase made from abroad can fail even when the card and balance are fine.
Merchants that price in many currencies can choose one for you. OpenAI prices ChatGPT in 68 currencies, according to Rail’s OpenAI guide, so a subscriber who signs up while traveling may be billed in a currency that carries Rail’s FX fee on every renewal. Check the currency at checkout before confirming a subscription abroad.
Contactless limits change at the border
Tap payments carry their own limits, set country by country. In the UK, cards have a single-transaction contactless limit of £100, according to UK Finance, with background limits that can ask for a PIN once spending passes a set total of no more than £300. Phone payments are treated separately: UK Finance says Apple Pay and Google Pay “will continue to operate without a fixed £100 limit,” because each payment is approved with Face ID, a fingerprint or a passcode.
A Rail card used through a phone wallet therefore sits on the more generous side of the UK rule, and a large purchase that would force a plastic card into a chip-and-PIN payment can still go through as a tap. Other countries set their own card limits, so check the local rule before a large tap payment. Rail’s own per-payment limits of $30,000 on Premium and $80,000 on First class apply everywhere, on top of whatever the local terminal allows.
The case against relying on a crypto card abroad
The first objection is cash. Rail’s fees page lists no ATM withdrawals, and both tiers are virtual cards that cannot be inserted into a cash machine. In a country where small shops and taxis take cash first, a traveler with only a Rail card needs another way to get local currency.
The second is coverage. A Premium or First class card is not offered in the 31 or 40 countries on Rail’s lists, and Rail’s terms treat using the service while located in an excluded country as prohibited. A traveler whose route crosses an excluded country cannot plan on the card there.
Rail charges top-up, monthly and issuance fees, with additional FX fees for foreign-currency payments. Compare the current fees and limits with your alternatives before choosing a tier.
The fourth is the prepaid structure. Holds freeze deposited money, and a hold on a prepaid balance can block other spending for days in a way a credit line absorbs.
Rail’s FX fee on non-dollar payments is 0.5% on Premium and 2–2.5% on First class. Check the billing currency and the current fees and limits before paying.
Both sides read the same numbers. The disagreement turns on whether the traveler already holds a fee-free bank card, a question the card cannot answer for them.
How to prepare a Rail card for a trip
Ten minutes before departure saves most of the problems above. Our step-by-step Apple Pay and Google Pay guide covers the wallet setup.
- 01Check both country lists. Confirm that every country on your route is outside the exclusion list for your tier. Premium excludes 31 countries and First class 40.
- 02Top up before you leave. Budget for Rail’s top-up and monthly fees, any applicable FX fee, and sufficient available balance for upcoming payments. Check the current fees and limits before funding your card.
- 03Add the card to Apple Pay or Google Pay. Check that the wallet works in the countries you are visiting, since Apple lists 101 countries and regions for Apple Pay.
- 04Plan for cash separately. Rail lists no ATM withdrawals, so carry another card or local currency for cash-only places.
- 05Leave room for holds. Car rentals, hotels and fuel pumps reserve more than they charge, up to $500 plus estimated charges at Hertz.
- 06Pick the local currency at every prompt. Decline the offer to pay in US dollars at terminals, cash machines and foreign websites.
- 07Pay with the card at least every 45 days. Under Rail’s terms, a card with no successful payment for more than 45 calendar days can be blocked by the card issuer.
Keep the card details in the Rail app for online bookings during the trip, and approve any 3D Secure prompt from your phone before the checkout page times out.
What this guide does not settle
Rail’s country lists describe where each card is offered. They do not name every country where a terminal will accept the card, and they can change. Check them before each trip, not once.
The fee comparison assumes every payment on the trip is charged in a currency other than the US dollar and excludes network fees, exchange withdrawal fees and the one-time issuance fee. A trip with a mix of dollar and local-currency charges falls between the domestic and foreign cases.
The dynamic currency conversion figures come from checks reported in 2017 by Stiftung Warentest and a Norwegian bank, cited by BEUC. Markups vary by merchant, provider and country, and more recent multi-country measurements were not available for this guide.
Hold amounts and release times are set by each merchant and its payment provider. The Hertz figures are its US policy, and hotels set their own rules by property, so a hold at one hotel in a chain says little about the next.
The contactless limits cited are the UK’s. Most countries publish their own figures through their banking associations, and this guide does not list them.
What to watch
- Rail’s country lists for each tier. Premium excluded 31 countries and First class 40 as of November 2026.
- Rail’s FX fee on non-dollar payments is 0.5% on Premium and 2–2.5% on First class. Check the billing currency and the current fees and limits before paying.
- The local-currency button at checkout. Dynamic currency conversion added 2.6% to 12% in Stiftung Warentest’s checks.
- Apple’s Apple Pay country list. Apple listed 101 countries and regions on October 27, 2026.
- Rail’s fees page. The tier figures in this guide date from November 13, 2026.
Where to use it FAQ
Where can I use a crypto card?
Wherever its card network is accepted, in the countries its program serves. A Rail card works online and in shops across 180+ countries.
In which countries does Rail not work?
Premium is unavailable in 31 countries, including Russia, Iran, North Korea, Cuba and Venezuela, and First class in 40, adding the United States, China, India, Turkey and Ukraine among others. Rail’s terms exclude Hong Kong from both tiers.
Can I use a crypto card abroad?
Rail’s FX fee on non-dollar payments is 0.5% on Premium and 2–2.5% on First class. Check the billing currency and the current fees and limits before paying.
Should I pay in local currency or US dollars abroad?
Rail’s FX fee on non-dollar payments is 0.5% on Premium and 2–2.5% on First class. Check the billing currency and the current fees and limits before paying.
Which Rail card is cheaper for travel?
Rail charges top-up, monthly and issuance fees, with additional FX fees for foreign-currency payments. Compare the current fees and limits with your alternatives before choosing a tier.
Why was my crypto card declined at a hotel or car rental?
Often because of a hold. Hertz may hold up to $500 plus the estimated charges, and fuel pumps in the US can hold $175, which a prepaid balance has to cover on top of the spending.
Can I withdraw cash abroad with a Rail card?
No. Rail’s fees page lists no ATM withdrawals, and both tiers are virtual cards, so plan for cash with another card or local currency.
Is a crypto card a good travel card?
Rail charges top-up, monthly and issuance fees, with additional FX fees for foreign-currency payments. Compare the current fees and limits with your alternatives before choosing a tier.
Sources
About this guide. Rail Research takes fees and limits from Rail’s own pages and prices, network costs and exchange fees from the sources below, checked on the dates shown. Rail Research is part of Rail. About Rail Research
- Rail, fees and limits page, updated November 13, 2026
- Rail, terms of use, Part B and Clause 10, prohibited activities
- Rail Research, “Rail vs SolCard,” country lists, and Rail pay guides for Airbnb and OpenAI, checked November 15, 2026
- BEUC, “Dynamic currency conversion” position paper, BEUC-X-2017-118, October 30, 2017, citing Stiftung Warentest and a Norwegian bank study
- Regulation (EU) 2019/518 of the European Parliament and of the Council
- Hertz, US credit and debit card policy
- Kelley Blue Book, “Gas stations can now place $175 bank hold,” June 28, 2022
- Apple, “Countries and regions that support Apple Pay,” published October 27, 2026
- Transport for London, contactless and mobile pay as you go
- Namecheap, card-decline guide
Fees, limits, country lists and merchant policies are as of November 16, 2026, and come from the sources listed above. They change, sometimes without notice. This guide is educational analysis, not financial or investment advice.